Reactive red 198 dye removal from textile wastewater by SBA-15 modified with cationic surfactant

Document Type : Research Article

Author

Department of Textile and Apparel Engineering, Qaemshahr Branch, Islamic Azad University, Qaemshahr, Iran

Abstract
Highly sensitive, accurate and relatively fast technique has been utilized to remove reactive red 198 (R.R. 198) dye in textile wastewater, using synthesised nanocomposites. Determination of R.R. 198 dye was carried out by UV-Vis spectrophotometer at λmax= 515 nm. A SBA-15 mesoporous silica was synthesized then was functionalised using dodecyl trimethyl ammonium chloride (DOTAC) cationic surfactant. TEM, elemental analysis CHNS, TGA, FT-IR, and BET techniques were used to characterize the nanocomposites features. This research studies the impact of various parameters in removal of R.R. 198 dye by nanocomposite, like pH, quantity of nanocomposite, contact time, type of eluting solvent, and concentration of R.R. 198 dye was investigated. Experiments show that the new nanocomposite (DOTAC/SBA-15) is an excellent and powerful nanocomposite for removing the R.R. 198 dye from textile wastewater such as, Mazandaran textile factory, Qaemshahr sangtab textile factory, Amol babakan textile factory and Behshahr Acryltab factory with suitable fallouts.

Graphical Abstract

Reactive red 198 dye removal from textile wastewater by SBA-15 modified with cationic surfactant

Keywords

Subjects


[1] (a) Z. Aksu, Application of biosorption for the removal of organic pollutants: A review, Process Biochem, 40 (2005) 997–1026. (b) A. A. Muhammad, H. Abdulmumini, Raw water lily (nymphaea lotus) leaves powder as an ‎effective adsorbent for the adsorption of malachite green dye from aqueous solution, Chem. ‎Rev. Lett. 6 (2022) 250-260. (c) ‎ A. D. P. Valery, D. K. A. Paterne, K. A. L. Chantal, K. D. Leonce, Assessment of metallic ‎pollution (Hg, Pb, Cd, Cu) of water and sediment in fish ponds located in a lowland in the city ‎of Daloa, Chem. Rev. Lett. 6 (2022) 92-98.‎ (d) S. Sallau, U. Sani, A. M. Zango, A. Abubakar, S. Y. Idris, H. Abubakar, Determination of ‎Organochlorine and Organophosphorous Pesticide Residues in Irrigated Water from Gubi,Waya ‎Dams and Gudum Fulani Irrigation Sites in Bauchi LGA,Bauchi State,Nigeria Using Composite ‎Sampling, J. Chem. Lett. 3 (2022) 119-123.‎
[2] (a) G.M. Walker, L. Hansen, J.A.Hanna, S.J. Allen, Kinetics of a reactive dye adsorption onto dolomitic sorbents, Water Res, 37(2003) 2081–2089. (b) A. Ahmadpour, Using of Activated Carbon Adsorption in Wastewater Industries, J. Chem. Lett. ‎‎3 (2022) 2-9. ‎(c) G. N. Zaharaddeen, S. Godwill, P. A.  Ekwumemgbo, Split Plot Central Composite Design for ‎Optimization of 4-Bromophenol Adsorption from Synthetic Wastewater, using Synthesized ‎BiFeO3 Perovskite Material, Chem. Rev. Lett. 6 (2023) 150-165. ‎
[3] M. Dogan, M. Alkan, Adsorption kinetics of methyl violet onto perlite, Chemosphere, 50 (2003) 517–528.
[4] D. Inthorn, S. Singhtho, P. Thiravetyan, E. Khan,  Decolorization of basic, direct and reactive dyes by pre-treated narrow-leaved cattail (Typha angustifolia Linn.), Bioresour Technol, 94 (2004) 299–306.
[5] W.T. Tsai, C.Y. Chang, M.C. Lin, S.F. Chien, H.F. Sun, M.F. Hsieh,  Adsorption of acid dye onto activated carbons prepared from agricultural waste bagasse by ZnCl2 activation, Chemospher, 45 (2001) 51–58.
[6] (a) G. Mezohegyi, A. Kolodkin, U.I. Castro, C. Bengoa, F. Stuber, J. Font, A. Fabregat, A. Fortuny, Effective anaerobic decolorization of azo dye acid orange 7 in continuous upflowpacked-bed reactor using biological activated carbon system, Ind. Eng. Chem. Res., 46 (2007) 6788–6792. (b) A. A. Majhool; M. Y. Saleh; A. K. O. Aldulaimi; S. M. Saeed; S. M. Hassan; M. F. El-Shehry; ‎S. M.Awad; S. S. S. Abdul Azziz, Synthesis of New Azo Dyes of Uracil via Ecofriendly Method ‎and Evaluation For The Breast, Liver and Lung Cancer Cells In vitro, Chem. Rev. Lett., 6 ‎‎(2023) 442-448. ‎
[7] N. Dizge, C. Aydiner, E. Demirbas, M. Kobya, S. Kara,  Adsorption of reactive dyes from aqueous solutions by fly ash: Kinetic and equilibrium studies, J. Hazard Mater., 150 (2008) 737–746.
[8] V.K. Garg, R. Gupta, A. Yadav, K. Kumar, Dye removal from aqueous solution by adsorption on treated sawdust, Bioresour Technol, 89 (2003) 121–124.
[9] H. Tayebi, Z. Dalirandeh, A. Shokuhi-Rad, A. Mirabi, E. Binaian, Synthesis of polyaniline/Fe3O4 magnetic nanoparticles for removal of reactive red 198 from textile waste water: kinetic, isotherm and thermodynamic studies,  Desalin Water Treat, 57 (2016) 22551-22563.
[10] K. Kadirvelu, M. Palanival, R. Kalpana, S. Rajeswari,  Activated carbon from an agricultural by-product, for the treatment of dyeing industry wastewater, Bioresour Techno, 74 (2000)  263–265.
[11] V.K. Gupta, A. Mittal, L. Krishnan, V. Gajbe,  Adsorption kinetics and column operations for the removal and recovery of malachite green from wastewater using bottom ash, Sep. Purif. Techno, 40 (2004) 87–96.
[12] A. Mittal, L. Kurup (Krishnan), V.K. Gupta,  Use of waste materials Bottom Ash and De-Oiled Soya, as potential adsorbents for the removal of Amaranth from aqueous solutions. J Hazard Mater, 117 (2005) 171–178.
[13] A. Mirabi, A. Shokuhi-Rad, F. Divsalar, H. Karimi-Maleh,  Application of SBA-15/diphenyl carbazon/SDS nanocomposite as solid-phase extractor for simultaneous determination of Cu (II) and Zn (II) ions, Arab J. Sci. Eng., 43 (2018)  3547-3556.
[14] M.M. Sadeghi, A. Shokuhi-Rad, M. Ardjmand,  A. Mirabi,   Functionalization of SBA-15 by dithiooxamide towards removal of Co (II) ions from real samples: Isotherm, thermodynamic and kinetic studies, Adv. Powder Technol, 30 (2019) 1823–1834.
[15] Z. Khanjari, A. Mirabi, A. Shokuhi-Rad, M. Moradian, . Selective removal of cadmium ions from water samples by using Br-PADAP functionalized SBA-15 particles, Desalin Water Treat, 130 (2018) 172-181.
[16] A. Mirabi, S.N. Hossein, Use of modified nanosorbent materials for extraction and determination of trace amounts of copper ions in food and natural water samples, Trends applied sci. res., 7 (2012) 541-549.
[17] A. Shokuhi-Rad, A. Mirabi, M. Peyravi,  M. Mirzaei,  Nickel-decorated B12P12 nanoclusters as a strong adsorbent for SO2 adsorption: Quantum chemical calculations, Can. J. Phys., 95 (2017) 958-962.
[18] M. Sadeghi, M. Moradian, H.A. Tayebi, A. Mirabi, Removal of Penicillin G from Aqueous Medium by PPI@SBA-15/ZIF-8 Super Adsorbent: Adsorption Isotherm, Thermodynamic, and Kinetic Studies, Chemosphere, 311 (2023) 136887.
[19] S. Kaveh, B. Norouzi, N. Nami, A. Mirabi,  Phytochemical synthesis of CdO nanoparticles: fabrication of electrochemical sensor for quantification of cefixime, J. Mater Sci.: Mater Electron, 32 (2021) 8932–8943.
[21] Z. Aghaee-Meibodi, A. Mirabi,S. Khandan, B. Azizi ,  Fe3O4/CuO/ZnO@MWCNT MNCs Promoted the Green Synthesis of Indenopyrimidin-1,2,4-Triazoles as Hybrid Molecules, Polycycl Aromat Compd., (2022) 1-24.
[22]  T. Pezeshkvar, B. Norouzi, M. Moradian, A. Mirabi, Fabrication of new nanocomposites based on NiO‑MWCNT‑sodium dodecyl sulfate in the presence of Gundelia tournefortii extract: application for methanol electrooxidation in alkaline solution, J. Solid State Electrochem, 26 (2022) 1479-1492.
[23] A. Shokuhi-Rad, S. Bagheri-Novir, S. Mohseni, N. Ramezani-Cherati,  A. Mirabi,  A DFT study of O2 and Cl2 adsorption onto Al12N12 fullerene‐like nanocluster, Heteroat Chem., 28 (2017)  e21396.
[24] S.A. Siadati, A. Mirabi, Diels-Alder versus 1,3-dipolar cycloaddition pathways in the reaction of C20 fullerene and 2-furan nitrile oxide, Prog. React. Kinet. Mech., 40 (2015) 383-390.
[25] A. Mirabi, A. Shokuhi-Rad, M.R. Jamali, N. Danesh, Use of modified γ-alumina nanoparticles for the extraction and preconcentration of trace amounts of cadmium ions, Aust. J. Chem., 69 (2015)  314-318.
[26] S. Ahmadi-Asoori, A. Mirabi, E. Tazikeh-Lemseki, E. Babanezhad-Orimi,  M. Habibi-Juybari,  The Synthesis of Surfactant Coated Glass Foam to Extract and Determine Trace Quantities of Polycyclic Aromatic Hydrocarbons in Drinking Water, J. Chem. Health Risks, 11 (2021) 1-11.
[28] S. Movaghgharnezhad, A.Mirabi, M.R. Toosi, A. Shokuhi-Rad, Synthesis of cellulose nanofibers functionalized by dithiooxamide for preconcentration and determination of trace amounts of Cd (II) ions in water samples, Cellulose, 27 (2020) 8885–8898.
[29] S. Ahmadi-Asoori, E. Tazikeh-Lemeski, A. Mirabi, E. Babanezhad, M. Habibi Juybari,  Preparation of nanocellulose modified with dithizone for separation, extraction and determination of trace amounts of manganese ions in industrial wastewater samples,  Microchem J., 160 (2021) 105737.
[30] S.S. Asadi-Ojaee, A. Mirabi, A. Shokuhi-Rad, S. Movaghgharnezhad, S. Hallajian, Removal of Bismuth (III) ions from water solution using a cellulose-based nanocomposite: A detailed study by DFT and experimental insights, J. Mol. Liq., 295 (2019) 111723.
[31] A. Mirabi-Semnakolaii, P. Daneshgar, A.A. Moosavi-Movahedi, M. Rezayat, P. Norouzi, A. Nemati, M. FarhadiSensitive determination of herbicide trifluralin on the surface of copper nanowire electrochemical sensor, J. Solid State Electrochem,15 (2011) 1953-1961. 
[32] S. Movaghgharnezhad, A. Mirabi, Advanced nanostructure amplified strategy for voltammetric determination of folic acid, Int. J. Electrochem Sci., 14 (2019)  10956-10965.
[33] T. Pezeshkvar, B. Norouzi, M. Moradian, A. Mirabi, Synthesis of nickel oxide nanostructures and its application for acyclovir antivirus drug sensing in the presence of sodium dodecyl sulfate, Ionics, 28 (2022)  4445–4459.
[34] A. Mirabi, N. Aliakbari, Preparation of Modified Magnetic Nanocomposites Dithiooxamide/Fe3O4 for Preconcentration and Determination of Trace Amounts of Cobalt Ions in Food and Natural Water Samples, J. Chem. Health Risks, 6(2016) 291–303.
[35] A. Mirabi, A. Shokuhi-Rad, H. Khodadad, Modified surface based on magnetic nanocomposite of dithiooxamide /Fe3O4 as a sorbent for preconcentration and determination of trace amounts of copper, J. Magn. Magn. Mater., 389 (2015) 130-135.
[36]  M.M. Sadeghi,  A. Shokuhi-Rad,  M. Ardjmand, A. Mirabi, Preparation of magnetic nanocomposite based on polyaniline/Fe3O4 towards removal of lead (II) ions from real samples, Synth. Met., 245 ( 2018) 1–9.
[37] A. Mirabi, A. Shokuhi-Rad,  S. Nourani, Application of Modified Magnetic Nanoparticles as a Sorbent for Preconcentration and Determination of Nickel Ions in Food and Environmental Water Samples, Trends  Anal Chem., 74 (2015) 146-151.
[38]  A. Mirabi,  A. Shokuhi-Rad,  S. Ahmadizadeh, Graphene oxide enhances SBA-15 ability towards preconcentration as well as determination of barbiturate drug in real samples, Kuwait J. Sci., 46 (2019) 41-49.
[39]  A. Mirabi,  A. Shokuhi-Rad, Z. Khanjari,   M. Moradian,  Preparation of SBA-15/graphene oxide nanocomposites for preconcentration and determination of trace amounts of rutoside in blood plasma and urine, Sens Actuators B: Chem., 253 (2017) 533-541.
[40]  S. Kaveh,  N. Nami,  B. Norouzi,  A. Mirabi,  Biosynthesis of (MWCNTs)-COOH/CdO hybrid as an effective catalyst in the synthesis of pyrimidinethione derivatives by water lily flower extract, Inorg Nano-Met Chem., 51 (2021) 1459-1470.
[41]  V.B. Cashin,  D.S. Eldridge,  A. Yu,  D. Zhao,Surface functionalization and manipulation of mesoporous silica adsorbents for improved removal of pollutants: a review, Environ Sci. Water Res. Technol., 4 (2018) 110–128.
[42]  Y. Zhu,  Z. Cheng,  Q. Xiang,  J. Xu,  Rational design and synthesis of aldehyde-functionalized mesoporous SBA-15 for high-performance ammonia sensor, Sens Actuators B., 256 (2018) 888–895.
[43]  I. Yuranov, L. Kiwi-Minsker,  P. Buffat,  A. Renken,  Selective synthesis of Pd nanoparticles in complementary micropores of SBA-15, Chem. Mater, 16 (2004) 760–761.
[44]  A.Y. Khodakov,  V.L. Zholobenko, R. Bechara,  D. Durand, Impact of aqueous impregnation on the long-range ordering and mesoporous structure of cobalt containing MCM-41 and SBA-15 materials, Micropor Mesopor Mat., 79 (2005) 29–39.
[45]  S.G. de-Avila,  L.C.C. Silva, J.R. Matos,Optimisation of SBA-15 properties using Soxhlet solvent extraction for template removal, Micropor Mesopor Mat., 234 (2016) 277–286.
[46] Y. Yamini ,  J. Hassan,  R. Mohandesi,  N. Bahramifar,  Preconcentration of trace amounts of beryllium in water samples on octadecyl silica cartridges modified by quinalizarine and its determination with atomic absorption spectrometry, Talanta, 56(2002) 375–381.
[47] V.K. Gupta,  P. Singh,  N. Rahman,  Adsorption behavior of Hg(II), Pb(II), and Cd(II) from aqueous solution on Duolite C-433: a synthetic resin, J. Colloid Interf. Sci., 275(2004) 398–402.
[48] A.A. Atia,  A.M. Donia,  K.Z. Elwakeel, Adsorption behaviour of non-transition metal ions on a synthetic chelating resin bearing iminoacetate functions, Sep. Purif. Technol., 43(2005) 43–48.
[49] A. Demirbas,   E. Pehlivan, F. Gode,  T. Altun,  G. Arslan,  Adsorption of Cu(II), Zn(II), Ni(II), Pb(II), and Cd(II) from aqueous solution on Amberlite IR-120 synthetic resin, J. Colloid Interf. Sci., 282 (2005) 20–25.
[50]  V.D. Grebenyuk,  S.V. Verbich,  N.A. Linkov,  V.M. Linkov,Adsorption of heavy metal ions by aminocarboxyl ion exchanger ANKB-35, Desalination, 115 (1998) 239–254.
[51] F. Sheikholeslami-Farahani,  S. Sadeghi-Marasht, A. Mirabi, M. Ghazvini,  M. Hosseinnasab-Rostam,  Ionic Liquid as Green and Recyclable Solvent for the Synthesis of Pyrazinoquinazolines: Study of Antioxidant Activity, Polycycl Aromat Compd., 42 (2022) 3663–3674.
[52]  A. Mirabi, M.R. Jamali,  Q. Kazemi, Determination of trace amounts of manganese in water samples by flame atomic absorption spectrometry after dispersive liquid-liquid microextraction, Bulg. Chem. Commun, 48 (2016) 525–531.
[53]  B. Salih,  A. Denizli,  C. Kavakli, R. Say,  E. Piskin, . Adsorption of heavy metal ions onto dithizone-anchored poly (EGDMAHEMA) microbeads, Talanta, 46 (1998) 1205–1213.
[54]  A.A. Atia, A.M. Donia,  A.M. Yousif, Synthesis of amine and thio chelating resins and study of their interaction with zinc (II), cadmium (II) and mercury (II) ions in their aqueous solutions, React. Funct.Polym., 56 (2003) 75–82.
Volume 7, Issue 6 - Serial Number 6
November and December 2024
Pages 1001-1009

  • Receive Date 11 March 2024
  • Revise Date 25 April 2024
  • Accept Date 11 May 2024